濟南電纜橋架的修復及維護工作
在當今快速發展的互聯網時代,電子行業發展迅速,其中電纜維護尤為重要。你對濟南電纜橋架了解多少?你知道如何修理和維護電纜橋架嗎?別擔心,各位。接下來中道開程將為大家介紹一些關于橋架維修保養的相關內容,希望能對大家有所幫助。
In today's rapid development of the Internet era, the rapid development of the electronic industry, in which cable maintenance is particularly important. How much do you know about Jinan cable tray? Do you know how to repair and maintain cable tray? Don't worry, everyone. Next, Zhongdao Kaicheng will introduce some related contents about bridge maintenance, hoping to help you.
濟南電纜橋架
Jinan cable bridge
一、濟南電纜橋架的修復工作
1、 Repair of cable bridge in Jinan
1、涂層處理
1. Coating treatment
涂層工藝分為刷涂、滾涂。刷涂或者滾涂時每層應從橫交錯反復進行涂,直到均勻為止,不能出現漏涂。
The coating process is divided into brush coating and roll coating. During brush coating or roll coating, each layer shall be applied repeatedly in a crisscross manner until it is even, and there shall be no missed coating.
2、銹跡處理
2. Rust treatment


通常電纜橋架采用氯磺化底漆二道進行兩部分除銹,表面除銹處理質量直接影響防腐工程的壽命,現場除銹通常是砂輪機或者人工除銹,在表面處理之后,在4小時內涂上底漆。如果處理不當發現有新銹,需要進行重新處理。
Generally, two layers of chlorosulfonated primer are used for two-part derusting of cable tray. The quality of surface derusting directly affects the service life of anti-corrosion engineering. Field derusting is usually carried out by grinder or manual derusting. After surface treatment, primer is applied within 4 hours. If the new rust is found after improper treatment, it needs to be treated again.
3、施工環境要求
3. Construction environment requirements
環境需要通風良好,溫度在13℃-30℃,不得低于5℃,相對濕度保持在80%以內。不宜在強烈日光下施工。遇到雨、霧、強風氣候不得在室外進行施工。
The environment should be well ventilated, the temperature should be between 13 ℃ and 30 ℃, and the relative humidity should be kept within 80%. It is not suitable for construction in strong sunlight. In case of rain, fog and strong wind, the construction shall not be carried out outdoors.
二、濟南電纜橋架的維護
2、 Maintenance of cable tray in Jinan
1、避免與腐蝕性液體接觸。
1. Avoid contact with corrosive liquids.
2、可用電纜橋架專用的保養蠟進行保養。
2. Special maintenance wax for cable tray can be used for maintenance.
3、定期清理電纜橋架表面的灰塵與銹跡。
3. Clean the dust and rust on the surface of cable tray regularly.
4、避免擺放在高溫潮濕地方。
4. Avoid placing in hot and humid places.
濟南電纜橋架
Jinan cable bridge
相信大家看了上述中道開程為大家介紹的有關濟南電纜橋架的修復及維護工作之后,相信大家對于橋架已經有了進一步的了解,希望上述內容能幫到大家,大家想要了解更多詳情,請多多關注我們的網站動態,隨時歡迎大家前來參觀
I believe that you have seen the repair and maintenance of Jinan cable tray introduced by the above-mentioned middle road project. I believe you have a further understanding of the bridge. I hope the above content can help you. If you want to know more details, please pay more attention to our website dynamics, and you are welcome to visit at any time
上一篇:電纜橋架使用時間過長如何進行清洗?
下一篇:如何有效電纜橋架的保障的承載力呢?
下一篇:如何有效電纜橋架的保障的承載力呢?
相關文章 / Recommended news
- 山東電纜橋架屋頂?shù)跹b:配件清單+標準化流程,新手也能零失誤
- 濟南電纜橋架安裝:200多斤600×200橋架,這樣吊裝又
- 山東電纜橋架定制:耐火板與防火型的核心區別,一文讀懂避坑指南
- 濟南電纜橋架選型誤區:100×100規格加隔板難?航豐的方案破解施工難題
- 山東電纜橋架避坑!貫穿孔成火災“隱形通道”?3步防火實操筑牢防線
- 濟南電纜橋架鋪設踩坑,層數、根數、限制,規范不看必返工
- 山東電纜橋架(鍍鋅款)接地線誤區,接錯必返工,規范要點一文說清
- 濟南電纜橋架線纜捆扎錯了=埋隱患,4種規范方法,施工必看
- 山東不銹鋼橋架現場打孔避坑!4步標準流程,90%施工方少走彎路不損橋架
- 山東電纜橋架選型封神指南!記住3句話,70%工程方避開選型陷阱不花冤枉錢
陽極氧化鋁合金橋架
托盤式電纜橋架
梯式電纜橋架
梯式不銹鋼電纜橋架
深灰色金屬防火電纜橋架


