山東電纜橋架可以用吊桿安裝嗎?
山東電纜橋架布線工程的配套項目,現在沒有特殊的規范指導,通常在電纜橋架的安裝,一般是使用橋架臂,這些配件支持電纜橋架、橋架和一些網站是用來攜帶橋吊桿,吊桿與電纜橋架可以安裝嗎?電纜橋架托架套筒的配額是多少?濟南漢界大橋廠家為我們介紹:
There is no special specification guide for the supporting projects of Shandong cable bridge and wiring engineering. Generally, the bridge arm is used for the installation of cable bridge. These accessories support the cable bridge, bridge and some websites to carry the bridge suspender. Can the suspender and cable bridge be installed? What is the quota of the cable bridge bracket sleeve? Jinan Hanjie bridge manufacturer introduces it to us:
電纜橋架可以用吊桿安裝。一般是采用井架加角鐵的做法,但這種方法承載力小,假如通過復核計算出足夠的承載力也可以。總之,一定要根據橋梁的自重、纜索的自重進行計算,確定吊桿吊架的選型和吊裝點的分布。
Cable tray can be installed with suspender. Generally, derrick and universal angle iron are used, but the bearing capacity of this method is small. If sufficient bearing capacity is calculated through recheck, it can also be used. In a word, the calculation must be based on the dead weight of the bridge and the cable to determine the selection of the suspender hanger and the distribution of the lifting points.

吊桿是指懸索橋中連接懸索索橋和橋面系統的吊桿。橋面系統的荷載通過吊桿傳遞到吊索上。吊桿可由圓鋼、眼桿或鋼套制成,通過電纜卡箍與主繩連接。井架一般分為輕型井架(SWL小于10噸)和重型井架(大于10噸)。吊桿主要由起重柱、吊桿裝置和起貨機組成。
Suspender refers to the suspender connecting the suspension bridge and the bridge deck system. The load of the deck system is transferred to the sling through the suspender. The suspender can be made of round steel, eye rod or steel sleeve and connected with the main rope through cable clamp. Derrick is generally divided into light derrick (SWL less than 10 tons) and heavy derrick (more than 10 tons). The suspender is mainly composed of lifting column, suspender device and crane.
電纜橋架的配額是多少?
What is the quota for cable tray?
橋用電纜橋架作支撐,在工程中很常見,只要鋪設電纜橋架就用電纜橋架,電纜橋架是用來支撐電纜橋架的輔助配件。當我們的電纜橋架支架配額是一套2-363一般鐵件還是一套2-629橋梁支撐架?
The bridge is supported by cable bridge, which is very common in engineering. As long as the cable bridge is laid, the cable bridge is used as an auxiliary accessory to support the cable bridge. When our cable tray support quota is a set of 2-363 general iron or a set of 2-629 bridge support?
這個區別其實很簡單,2-363一般鐵件為現場生產安裝,記得加漆,2-629橋架為成品支撐。
This difference is actually very simple. 2-363 general iron parts are field production and installation. Remember to add paint, and 2-629 bridge is finished support.
以上是山東電纜橋架廠家為大家介紹的相關內容,想要了解更多內容,歡迎訪問網站:http://www.qianhe02.comThe above is the relevant content introduced by Shandong cable bridge manufacturer for you. To learn more, please visit the website: http://www.qianhe02.com
上一篇:電纜橋架表層處理要點是什么
下一篇:如何根據環境選擇濟南電纜橋架?
下一篇:如何根據環境選擇濟南電纜橋架?
相關文章 / Recommended news
- 山東電纜橋架屋頂?shù)跹b:配件清單+標準化流程,新手也能零失誤
- 濟南電纜橋架安裝:200多斤600×200橋架,這樣吊裝又
- 山東電纜橋架定制:耐火板與防火型的核心區別,一文讀懂避坑指南
- 濟南電纜橋架選型誤區:100×100規格加隔板難?航豐的方案破解施工難題
- 山東電纜橋架避坑!貫穿孔成火災“隱形通道”?3步防火實操筑牢防線
- 濟南電纜橋架鋪設踩坑,層數、根數、限制,規范不看必返工
- 山東電纜橋架(鍍鋅款)接地線誤區,接錯必返工,規范要點一文說清
- 濟南電纜橋架線纜捆扎錯了=埋隱患,4種規范方法,施工必看
- 山東不銹鋼橋架現場打孔避坑!4步標準流程,90%施工方少走彎路不損橋架
- 山東電纜橋架選型封神指南!記住3句話,70%工程方避開選型陷阱不花冤枉錢
陽極氧化鋁合金橋架
托盤式電纜橋架
梯式電纜橋架
梯式不銹鋼電纜橋架
深灰色金屬防火電纜橋架


