怎么檢查橋架的外觀是否符合規定?
對于電纜橋架這種產品來講,外觀十分的重要!因?yàn)檫@影響著橋架的防腐和壽命等問題!下面濟南電纜橋架的小編就給大家分享一下檢查橋架的外觀是否符合規定的一些標準,希望對大家有所幫助!
The appearance of cable bridge is very important for this kind of product. Because it affects the anti-corrosion and life of the bridge. The next edition of Jinan Cable Bridge Frame will share with you some criteria for checking whether the appearance of the bridge meets the requirements. I hope it will be helpful to you all!
表面防腐層材料應符合現行有關標準的規定。
Surface anticorrosive coatings should comply with the relevant national standards.
熱浸鍍鋅的托盤、橋架鍍層表面應均勻,無毛刺、過燒、掛灰、傷痕、局部未鍍鋅(直徑2mm以上)等缺陷,不得有影響安裝的鋅瘤。螺紋的鍍層應光滑,螺栓連接件應能擰入。
Hot-dip galvanized pallet and bridge plating should be uniform, without burrs, burning, hanging ash, scars, local non-galvanized (diameter more than 2 mm) defects, and no galvanoma affecting installation. The plating of the threads should be smooth and the bolted joints should be able to be screwed in.
電鍍鋅的鋅層表面應光滑均勻,致密。不得有起皮、氣泡、花斑、局部未鍍、劃傷等缺陷。
The surface of galvanized zinc coating should be smooth, uniform and compact. No flaws such as peeling, bubbles, spots, partial non-plating, scratches, etc. shall be allowed.
噴涂應平整、光滑、均勻、不起皮、無氣泡水泡。
Spraying should be flat, smooth, uniform, no skin, no bubbles and blisters.
橋架焊縫表面均勻,不得有漏焊、裂紋、夾渣、燒穿、弧坑等缺陷。
The weld surface of the bridge frame is uniform, and there shall be no defects such as welding leakage, cracks, slag inclusion, burning through, arc pits, etc.


橋架螺栓孔徑,在螺桿直徑不大于M16時,可比螺桿直徑大2mm。
The diameter of bolt hole in bridge frame is 2 mm larger than that of bolt when the diameter of bolt is less than M16.
螺栓連接孔的孔距允許偏差:同一組內相鄰兩孔間距±0.7mm,同一組內任意兩孔間距±1mm;相鄰兩組的端孔間距±1.2mm。
The allowable deviation of the hole spacing of bolt connection holes: the spacing of adjacent two holes in the same group (+0.7 mm), the spacing of any two holes in the same group (+1 mm), and the spacing of end holes in adjacent two groups (+1.2 mm).
感謝您的閱讀與觀看,本文的精彩內容來自:濟南電纜橋架,我們會有更多的精彩內容繼續為您呈現,詳情請點擊:http://www.qianhe02.com
Thank you for your reading and watching. The wonderful content of this article comes from: Jinan Cable Bridge, we will continue to show you more wonderful content. For more details, please click: http://www.qianhe02.com.
上一篇:橋架內敷設電纜有哪些原則!
下一篇:使用網格式電纜橋架有什么優勢?
下一篇:使用網格式電纜橋架有什么優勢?
相關文章 / Recommended news
- 山東電纜橋架屋頂?shù)跹b:配件清單+標準化流程,新手也能零失誤
- 濟南電纜橋架安裝:200多斤600×200橋架,這樣吊裝又
- 山東電纜橋架定制:耐火板與防火型的核心區別,一文讀懂避坑指南
- 濟南電纜橋架選型誤區:100×100規格加隔板難?航豐的方案破解施工難題
- 山東電纜橋架避坑!貫穿孔成火災“隱形通道”?3步防火實操筑牢防線
- 濟南電纜橋架鋪設踩坑,層數、根數、限制,規范不看必返工
- 山東電纜橋架(鍍鋅款)接地線誤區,接錯必返工,規范要點一文說清
- 濟南電纜橋架線纜捆扎錯了=埋隱患,4種規范方法,施工必看
- 山東不銹鋼橋架現場打孔避坑!4步標準流程,90%施工方少走彎路不損橋架
- 山東電纜橋架選型封神指南!記住3句話,70%工程方避開選型陷阱不花冤枉錢
陽極氧化鋁合金橋架
托盤式電纜橋架
梯式電纜橋架
梯式不銹鋼電纜橋架
深灰色金屬防火電纜橋架


